Write your store's popup content
Sort by:
DESCRIPTION:
This Buckle-Flap Baguette bag showcases a sleek, elongated silhouette with a curved top edge and a tailored buckle-flap closure. Built for adaptability, it can be made in either vegetable tanned or chrome tanned leather, offering looks that range from polished and minimal to richly textured.
The full set includes a pre-cut pattern and a set of hardware fittings (two rectangle rings, one buckle, two sets of rivets, and one magnetic snap set), available for separate purchase.
Hardware Material :
Gold : 24K gold plated stainless steel
Silver : Stainless steel
Finished Bag Size : 27 × 15 × 4 cm (10.6 × 5.9 × 1.6 inches)
Difficulty Level : 4 / 5
DESCRIPTION:
These flat-nose pliers are purpose-built for pulling needles through leather during hand-stitching — a task that's clumsy and slow with ordinary pliers, which have to be picked up and set down with every single pull. Designed to fit comfortably in the palm, the jaws spring back open automatically after each squeeze, and a finger ring at the tail keeps the tool secure in hand and prevents accidental drops. The jaws are textured with fine grooves to grip the needle firmly without slipping, and can be lined with a thin (0.2mm) strip of leather for extra cushioning and an even tighter hold. Made from 3Cr13 stainless steel and vacuum heat-treated to HRC50+ — close to the hardness of a kitchen knife — these pliers hold their shape under pressure and won't deform with regular use.
Size : 113 mm (5.3")
Material : 3Cr13 stainless steel
Weight: 105g
DESCRIPTION:
This awl is ideal for scoring guide lines on leather or enlarging existing punch holes for stitching. The handle is crafted from black walnut wood, offering a warm, natural tone and a smooth, comfortable grip. The one-piece tip features a gently rounded point — safe and easy to control right out of the box — while still allowing for further sharpening to achieve a finer edge, if preferred.
Size : 113 mm (4.45")
Material : Black Walnut Wood
DESCRIPTION :
This oval prong buckle combines a polished, rounded frame with a clean, minimal profile, featuring a center pin that secures through the strap for a reliable, adjustable fit. Its soft oval curve sits comfortably against the strap while minimizing wear at the edges over time, helping belts and leather goods hold their shape and finish for the long run.
Material :
Measurements :
Length × Width: 30.5 × 20 mm (1 3/16" × 13/16")
DESCRIPTION :
Small in size, big on personality. These drop earrings feature a sleek square bezel, ready to be filled with a scrap of favorite leather for a pair no one else has.
The process couldn't be simpler: trim the leather to fit, press it into the bezel, and secure with leather glue. Whether styled bold with an exotic print or kept classic with a solid tone, the finished look is entirely customizable.
Pairs beautifully with the matching cuff bracelet or hair clip for a coordinated set, or mix and match colors for a look that's one of a kind.
Material :
Properties :
Laser printing and etching compatible
Dimensions :
DESCRIPTION :
Give your leathercraft a new dimension with this elegant open cuff bracelet, featuring a smooth oval bezel designed to showcase a custom leather inlay. The open-back design slides on effortlessly and fits comfortably on any wrist — no clasp needed.
Simply cut your leather to size and secure it into the bezel with regular leather glue for a clean, polished finish. Whether you choose bold exotic prints, soft pastel tones, or classic solid leather, each bracelet becomes a one-of-a-kind piece that reflects your personal style.
Material :
Properties :
Laser printing and etching compatible
Dimensions :
DESCRIPTION :
This barrette-style hair clip is designed with a secure, easy-open mechanism, ensuring a comfortable and reliable hold. By adding a piece of leather, each clip becomes a one-of-a-kind accessory, elevating a simple hairstyle into a statement look.
Crafting your own hair clip is simple: cut leather to size and attach it to the metal frame with regular leather glue. Use the cutting die for efficient production of multiple clips, while the clear acrylic mount ensures accurate placement for clean, professional results.
Material :
Properties :
Laser printing and etching compatible
Dimensions :
DESCRIPTION:
This Standard Luggage Tag is an entry-level to intermediate leatherworking project. It’s a stylish leather accessory that makes a great addition to your collection. Designed with a beautifully crafted buckle and built for durability, it is easy to attach and made to last.
Featuring a privacy flap and secure strap fastened with a snap button, the tag keeps personal information protected while helping your bag stand out during transit.
The full set includes:
Hardware Material :
Gold : 24K gold plated stainless steel
Silver : Stainless steel
Finished Tag Size : 150 × 62 mm (approximately 5.9 × 2.4 inches)
Difficulty Level : 3 / 5
Leather Requirement : Approximately 0.5 sq ft of leather is required. All of our leather types are suitable for this project, including vegetable-tanned and chrome-tanned leathers such as Epsom, Togo, Evercolor, and more.
Recommended leather thickness: 1.2 mm to 1.6 mm
Lining : Optional (interior lining or leather lining can be added depending on preference)
DESCRIPTION:
A slim and refined cardholder with elegant curved lines and a timeless silhouette. This design offers the flexibility to add extra pockets on the back, allowing you to customize the layout to suit your needs.
Cardholders are a great entry-level leathercraft project, and this pattern makes the process approachable while still delivering a sophisticated result. Explore your creativity by mixing and matching different leather textures and colors to create a truly unique piece.
Finished Cardholder Size :3.2" × 4.3" (82 × 109 mm)
Difficulty Level : 1.5 / 5
Leather Requirement : Approximately 0.5 sq ft of leather (all of our leather types are suitable for this project, including Epsom, Togo, Evercolor, and more)
Lining : For a more premium finish, Sully goatskin is recommended as the interior lining to add a luxurious feel. You may also choose our adhesive liner depending on your preference, or leave the natural rough backing of the leather exposed for a more raw and artisanal look.
DESCRIPTION:
This modern, elegant shoulder bag features a clean silhouette with refined proportions. Designed for versatility, it can be crafted in either supple or more structured leather to create different shapes and style expressions, ranging from relaxed drape to a more structured form.
The full set includes a pre-cut pattern, a set of snap buttons, and a Round Beveled Magnetic Snap set, available for separate purchase.
Hardware Material :
Gold : 24K gold plated stainless steel
Silver : Stainless steel
Finished Bag Size : 28 × 30 × 8 cm
Difficulty Level : 3.5 / 5
Leather Requirement : Approximately 5–6 sq ft of leather (all of our leather types are suitable for this project, including Epsom, Togo, Evercolor, and more)
Lining : Optional (interior lining or leather lining can be added depending on preference)
DESCRIPTION :
Designed with a thicker, heavier profile, this Heavy Solid D-Ring delivers a bold appearance and a substantial hand feel. Made from solid stainless steel, it offers excellent durability, and corrosion resistance.
Material :
Properties :
Laser printing and etching compatible
Dimensions :
Inner Diameter : 13 mm (0.51"), 16 mm (0.63"), 20 mm (0.79")
DESCRIPTION :
Jump rings are essential connectors used to attach chains, swivel snaps, keychains, and other hardware components. They allow multiple pieces of hardware to be securely linked while maintaining flexibility in movement.
Our jump rings are designed to match the finish of our hardware collection, ensuring a consistent and professional look across your projects.
*Price is per jump ring.
Material :
Dimensions :
DESCRIPTION :
A bold statement piece designed for standout bags. The Milano lock features an oversized square profile that adds a strong, architectural presence to your design.
The lock is designed with a leather inlay surface, allowing you to insert matching leather for a seamless and refined look that blends perfectly with the rest of your bag.
For precise results, we also offer matching cutting dies available for purchase. These allow you to cut leather inserts accurately, ensuring a clean fit and a consistent, professional finish across your projects.
Material :
Dimensions :
Width x Length: 70 mm x 55 mm (2 3/4" × 2 3/16")
DESCRIPTION:
Made from soft, dense natural wool, this brush is ideal for treating the flesh side (back side) of leather. The fine wool fibers allow for smooth and even application across larger surfaces.
It absorbs liquids thoroughly, making it well-suited for applying alcohol-based dyes, edge paint, and other finishing liquids. The brush distributes liquid evenly, helping achieve smooth coloring and efficient application.
Easy to clean and reusable, this natural wool brush is a practical and efficient tool for leatherworking.
Size : 20 x 150 mm (0.8" × 5.9")
Material : Wool & Steel
DESCRIPTION:
Inspired by traditional saddle hardware, this D-Ring is thoughtfully designed with a subtle curve to create a smooth, secure connection for bag straps, chains, charms, or other accessories.
The gentle contour allows the hardware to sit naturally against the leather, helping reduce friction and minimize surface scratching — a small but intelligent detail that makes a meaningful difference in long-term wear.
It pairs beautifully with our Square Rings for a cohesive, structured finish.
Material :
Measurements :
Inside Diameter: 12mm (15/32"), 15mm (19/32"), 20mm (25/32")
DESCRIPTION :
This oval center-bar buckle features a smooth, balanced frame with a refined silhouette designed for durability and precise fastening. The centered bar allows for easy strap adjustment, making it suitable for belts, straps, and a wide range of leather goods. Its timeless oval shape helps reduce stress on leather edges, extending the lifespan of your projects.
Material :
Measurements :
Length × Width
DESCRIPTION :
Featuring two built-in spring clasps, this hardware allows for quick and secure opening and closing, ensuring reliable connections every time. Designed as a chain shortener, it is available in two sizes to accommodate a wide range of bag chain styles. Ideal for connecting chains, bag charms, and accessories, it can also be used as a versatile link for added flexibility in leather projects.
Material :
Dimensions :
Length × width
DESCRIPTION :
This classic lobster claw clasp features a timeless traditional design and is available in three sizes, from mini to large. Crafted from stainless steel to ensure long-lasting durability, it’s ideal for connecting bag chains, bag charms, and small accessories in leather projects.
Material :
Dimensions :
Total height × width
DESCRIPTION:
Epi-style leather is a premium cowhide leather defined by its distinctive embossed ripple texture—raised, uniform ridges pressed into the surface—that adds both visual depth and tactile luxury. Treated with a protective finish, it offers excellent resistance to scratches and water, making it practical for everyday wear without sacrificing elegance. The treated surface helps maintain its appearance over time, and while it doesn’t develop a soft patina like untreated leathers, its color stays rich and true. It holds structure well and is ideal for pieces where shape and durability are important.
Key Features:
DESCRIPTION:
Epi-style leather is a premium cowhide leather defined by its distinctive embossed ripple texture—raised, uniform ridges pressed into the surface—that adds both visual depth and tactile luxury. Treated with a protective finish, it offers excellent resistance to scratches and water, making it practical for everyday wear without sacrificing elegance. The treated surface helps maintain its appearance over time, and while it doesn’t develop a soft patina like untreated leathers, its color stays rich and true. It holds structure well and is ideal for pieces where shape and durability are important.
Key Features:
